The digital displays D210 provide the presentation of the tempera-ture value via power output of the pyrometer. Therefor the display has to be scaled to the adequate measuring range of the pyrometer. This can be done with the control panel of the display or via software AST Pro.
The digital display are intended to be installed within control panels.The devices can be installed by using the provided clamp screws. For operating the devices require a power supply of 100 to 240 V AC. The display units provide a automatic storage of the measured maximum and minimum value. To check it (only in measurement mode available), use the MAX/MIN key.
Key Features
- Operating temperature –10 °C to 55 °C
- Input D210: 4 to 20 mA/0 to 20 mA 1 D210: 4 to 20 mA (RS-485)
- Power supply 100 to 240 V AC, 50/60 Hz
- Input D210: 4 to 20 mA/0 to 20 mA 1 D210: 4 to 20 mA (RS-485)
- Measurement uncertainty ± 0.1 % of measured value ± 1 digit
- Alarm outputs 2x relays, max. 250 V AC, 5 A or 30 V DC, 5 A, response time ca. 250 ms
- Storage temperature –25 °C to 65 °C