We measure accurate temperature in extreme conditions

Effect of Emissivity changes on temperature measurement

AST

Effect of color, shape, and chemical composition (Emissivity) changes on non-contact temperature measurement

Dependence of profile emissivity from profile shape

Aluminum  Profile measurements with AE3000 / A4-IN / A5-IN pyrometer

Emissivity

Working distance- 1000 mm, Measurement spot diameter- 10 mm

Emissivity

Emissivity= 0.08-0.11

Real temperature readout thermocouple

(T measured min=360C)

Emissivity= 0.04-0.06

Readout: T-2% (T measured min=400C)

Emissivity

Emissivity= 0.16-0.25

Emissivity= 0.1

Emissivity= 0.1-0.14

 

Correct readout for each emissivity

Emissivity

Emissivity= 0.10-0.20

The average readout for all small profiles is in the field of pyrometer view.

Small profiles measurements with measurement spot 5mm diameter

T measured  min=400C –  for a)

T measured  min=450C – for b)

“Out of range” state – for c)

Emissivity
Emissivity

This algorithm allows accurate measurement for each type of target: flat, cylinder smooth, or bright surfaces, and for different shapes of aluminum profiles.

AST developed special pairs of analytical coefficients, allowing accurate measurements.

Different coefficients have been developed for each of the below applications:

 

Accuracy of aluminum profile temperature measurements– Most measurements are within a 1% error

Practical statistics of profiles measurements accuracy- difference between pyrometer to reference thermocouple readout in % aluminum profiles measurements

Accuracy of aluminum billets temperature measurements– Most measurements are within a 1% error

Practical statistics of AL billets measurements accuracy The difference in % between pyrometer to reference thermocouple readout aluminum billets measurements.

emissivity
Video Technical solution

Send us your Inquiry / Feedback’s

Skip to content